Advertisement
Operation
POWER/INPUT SELECT
ii
ii
ii
i ii
1
First,
make
all equipment
connections.
Connect
the AC power cord into the TV, then plug the power
cord into a wall outlet.
Press the POWER button
located
on the TV to turn on the TV. The power
indicator
will light.
• In the standby mode, press the POWER,
CHANNEL, INPUT SELECT or number buttons on
the remote control to turn on the TV.
Select
the
viewing
source
by
pressing
INPUT
SELECT repeatedly.
Note:
See page 22 if you have not auto programmed
the
TV to receive channels
in your local broadcast
area.
After viewing, press the POWERbutton on the
remote control. The TV reverts to standby mode.
Note:
If you want to turn the TV off, press the POWER button
located
on the remote
control.
If you
intend
to be
away on vacation,
disconnect
the plug from the wall
outlet.
20
Advertisement
