Advertisement
optionalequipment(Continued)
- To watch digitally broadcast programs,
purchase
and connect a digital set-top box.
Connections
Connect the digital set-top box video outputs to the
COMPONENT
(Y, PB, PR) jacks and connect the
digital set-top box audio outputs to the AUDIO
jacks.
Viewing Setup
1. Turn on the digital set-top box. (Refer to the
owner's manual for the digital set-top box.)
2. Use the INPUT SELECT button on the remote
control to select Component.
TV Back Panel
TV Side Panel
DTV Receiver (Set-top Box)
- Plug headphones
into the H/P jack as shown.
- Adjust the sound level of the headphone
using the
VOLUME ( +, -) buttons. While you are listening through a
headphone(s),
TV speakers will not be heard.
TV Side Panel
The TV has a special signal output capability which allows you to hook up a second TV or monitor.
Connect the second TV or monitor to the TV's DVD OUTPUT and OPTICAL DIGITAL SOUND OUT jack. (See the
Operating Manual of the second TV or monitor for further details regarding that device's input settings.)
Notes: • If your second TV or monitor has no optical digital audio input jack, it's impossible to use DVD digital sound output.
• Do not look into the optical output port. Looking at the laser beam may damage your vision.
• If your external audio equipment has a digital audio input optical port, you can connect it to your TV.
TV Back Panel
Second TV or Monitor
input terminals
OR
TV Back Panel
Second TV or Monitor
input terminals
18
Advertisement
