Advertisement
To prevent the equipment damage,never
plug in any power cords until you have finished connecting all equipment.
- For optimum picture quality, adjust antenna direction.
- An antenna cable and converter are not supplied.
Connecting to an Inside Antenna Setup
- Typical wall antenna Jack used in apartment
buildings, connect the antenna cable as shown below.
(Use
the correct type of antenna cable {or the type e! wal! antenna Jack.)
O
O
O
Apartment
Buildings
Wall Connection
Jack
(Not supplied)
Antenna Jack
- If you have a 75£2 round cable, insert the bronze wire and then tighten the connection
nut. If you have a 300_ fiat wire, connect
the twisted wire to the antenna converter and then connect the converter to the antenna jack on the TV.
- If using 75£2 round cable, do not bend the bronze wire. It may cause poor picture quality.
Connecting to an Outside Antenna Setup
- This type of antenna is commonly used in single family dwellings.
Single Family Home
VHF Antenna
Turn clocKwise to tighten.
u.F-1T /,
Antenna
! i,y""'
75,2 Round Cable
BronzJWire
_"_-'_'_"'*'
300,2
F[a't Wire
%#
Antenna
Converter
(Not supplied)
Antenna Jack
- In poor signal areas, to get better picture quality, install a
signal amplifier to the antenna as shown to the right.
- If signal needs to be split for two TVs, use an antenna
signal splitter for connection.
PCINPUT
ANTIN
15
Advertisement
