Page 1
Spring Driven Hose Reel Instruction Manual WARNING: Read carefully and understand all INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury. Save these instructions in a safe place and on hand so that they can be read when required. REV 07/27/23...
GENERAL SAFETY REGULATIONS WARNING: The warnings, cautions, and instructions discussed in this instruction manual cannot cover all possible conditions or situations that could occur. It must be understood by the operator that common sense and caution are factors that cannot be built into this product, but must be supplied by the operator.
HOSE REEL SAFETY PRECAUTIONS 1. Use proper eye protection when assembling and using the hose reel. 2. Keep children away from the work area. 3. Personal injury and/or equipment damage may result if proper safety precautions are not observed. 4. Ensure that the reel is properly installed before connecting input and output hoses. 5.
180°FREEDOM OF ROTATION Locking Position 60° 60° Locking Position Locking Position 5. Apply teflon tape or pipe sealant to supply line threads, attach to reel inlet and tighten. The other end of the incoming line can now be connected to the desired supply source. 6.
4. Dismantling of the unit by unskilled personal could prove hazardous; the risk involved mainly concerns the preloaded springs. LIMITED WARRANTY For Warranty Terms and Conditions see macnaught.com.au / macnaughtusa.com. For a list of Australian Service Centres see macnaught.com.au Page 4...