Bissell 3011 Series Repair Manual page 18

How to Access the Unit Interior
Foot
1. Depress release button to free brush cover then
rotate away from unit and remove
2. Grasp pull tab on brush roll and lift upward to
remove
3. Remove 2 #2 Phillips head screws in the squeegee
bar then gently pry out and remove being mindful
of the clip in the lower left corner and upper right
corner
4. Remove 11 now visible #2 Phillips head screws, note
all holes marked "L" will use a long screw and not
the short screw found in the others
5. Gently pry and split the foot assembly removing
the top cover
Screw Length Marking
Return