Overview - Siemens SIMATIC IFP1200 V2 Product Information

Overview

This product information contains important information on use of the device in hazardous
zones. Read this product information completely and follow the instructions contained in it.
Further information on the device can be found in the accompanying operating instructions.
Document scope
This document applies for the following SIMATIC IFP V2 devices with article numbers
6AV7863-.....-2...:
• SIMATIC IFP1200 V2, IFP1500 V2, IFP1900 V2, IFP2200 V2, IFP2400 V2
• SIMATIC IFP1200 V2 extended, IFP1500 V2 extended, IFP1900 V2 extended, IFP2200 V2
extended, IFP2400 V2 extended
• SIMATIC IFP1500 V2 ETH, IFP1900 V2 ETH, IFP2200 V2 ETH, IFP2400 V2 ETH
This document also applies for the Transceiver Unit with the article number
6AV7860-3EH00-0AA0.
Conventions
The following conventions apply in these operating instructions:
• The term "device" is used for all SIMATIC IFP V2 devices, SIMATIC IFP V2 extended devices,
SIMATIC IFP V2 ETH devices and the Transceiver Unit.
• The devices IFP1200 V2, IFP1500 V2, IFP1900 V2, IFP2200 V2 and IFP2400 V2 are referred
to as "standard versions" of the SIMATIC IFP V2 devices.
• The devices IFP1500 V2 ETH, IFP1900 V2 ETH, IFP2200 V2 ETH and IFP2400 V2 ETH are
referred to as "ETH versions" or "Ethernet Monitors".
• The standard versions, extended versions and Ethernet Monitors are referred to as "built-in
devices".
• The projective-capacitive multi-touch screen of the devices is also referred to as "capacitive
multi-touch screen" or "touch screen".
UL hazardous approval
Observe the following notes:
• The device shall be supplied from an isolating source.
• Only for use in LAN, not for connection to telecommunication circuits.
UL hazardous E-file numbers: E472610
4
IFP V2 built-in devices and Transceiver Unit UL hazardous information
Product Information, 12/2023, A5E53493649-AA
1