Position Request - Uniden OCEANUSDSC-BK Owner's Manual

4. Select the category of your call using
CH L and M (
ROUTINE
Note: ROUTINE
previously selected channel.
5. Press SELECT to transmit the ALL
SHIPS DSC signal.
When sending either an
SAFETY
automatically move to channel 70 until
all of the data is received.
6. After selecting
ALL SHIPS call is transmitted, the radio
will switch to Channel 16. You should
wait a few minutes before transmitting
the ALL SHIPS call information.
1-D. POSITION REQUEST
This radio has the ability to request the position of an individual vessel
that is registered in the DIRECTORY.
1. Press SELECT at
DSC CALL
INDIVIDUAL
Press CH M three times to select
2.
POS REQUEST
URGENCY
).
calls tune to the
message, all radios will
URGENCY
DSC CALL
, see page 21).
appears.
.
, SAFETY ,
URGENCY or
or SAFETY
(To enter
24