Uniden PC68LTW User Manual page 8

pc68ltw.qxd 2/23/99
T T o o R R e e c c e e i i v v e e
Be sure that the power source, antenna, and microphone
are properly connected before proceeding.
1. Turn unit ON.
VOLUME Control to a
comfortable level.
2. Select CHANNEL.
3. Set switch to NB/ANL .
Dynamic Squelch Control automatically sets Squelch to the optimal level
for stronger signals. To scan for weaker signals, turn off Dynamic Squelch
Control and perform the following steps:
4. Turn SQUELCH fully clockwise
so only strong signals can get through.
4b. Turn SQUELCH fully counter-clockwise
until you hear a hiss. Everything gets
through - noise, weak signals, and
strong signals.
4c. Turn SQUELCH back clockwise until
the hiss stops. Only clearer signals get
through.
3:09 PM Page 6
Set SQUELCH only when
the radio is not receiving
a strong signal.
6