Table of Contents
Advertisement
Initial RTL (MC1 C1 B1)
Configure round trip latency initial value.
RTL (MC0 C0 A1)
Configure round trip latency value.
RTL (MC0 C1 A1)
Configure round trip latency value.
RTL (MC1 C0 B1)
Configure round trip latency value.
RTL (MC1 C1 B1)
Configure round trip latency value.
ODT Setting
Dimm ODT Training
ODT values will be optimized by Dimm On-Die Termination Training.
ODT WR (A1)
Configure the memory on die termination resistors' WR for channel A1.
ODT WR (B1)
Configure the memory on die termination resistors' WR for channel B1.
ODT NOM (A1)
Use this to change ODT (CH A1) Auto/Manual settings. The default is [Auto].
ODT NOM (B1)
Use this to change ODT (CH B1) Auto/Manual settings. The default is [Auto].
ODT PARK (A1)
Configure the memory on die termination resistors' PARK for channel A1.
ODT PARK (B1)
Configure the memory on die termination resistors' PARK for channel B1.
Advanced Setting
ASRock Timing Optimization
Configure the fast path through the MRC.
40
Advertisement
Table of Contents
