Table of Contents
Advertisement
Connecting External Devices
Connecting to a MIDI Sound Module
Sound Module
attr
TRE
Gut
ome
Making MIDI Settings
When connecting a MIDI device, make the following
settings.
@ Selecting the MIDI Send
Channel
MIDI features sixteen MIDI channels, numbered 1-16.
Simply connecting a cable is not enough for communication
to take place. The connected devices must be set to use the
same MIDI channels. Otherwise, no sound will be produced,
and no sounds can be selected.
Select the transmit channel (1-16) of the HP 337.
When the piano is turned on, Channel 1" is selected.
]. Press the [Function] button.
The [Function] button's indicator blinks.
2. Press the [Strings] button.
3. Use the Variation [+] and [-] buttons to choose the
transmit channel.
4. Press the [Function] button.
The [Function] button's indicator goes out.
"Tn Split mode, the lower part of the keuboard is not sent.
* | The HP 337 receives all sixteen channels.
@ Transmitting a Recorded
Performance to a MIDI Device
or Computer
You can have your recorded performances be sent to
connected MIDI devices or computers.
Recorded performance on the HP 337 is deleted when the
piano is turned off. You can send and save your recorded
performances to a MIDI sequencer or computer.
This section describes how to save in a MIDI sequencer.
When you tum on the power, this is set to "OFF" (data is not
sent).
]. First connect a MIDI sequencer.
For details on connections, refer to "Making Connections
to MIDI Devices" (p. 50).
2. Perform recording on the HP 337.
3. Press the [Function] button.
The [Function] button's indicator blinks.
4. Press-the [Demo] button.
5. Use the Variation [+] and [-] buttons to set it "ON."
Data is sent when set to "ON." Data is not sent when set
to "OFF."
6. Start recording on the connected MIDI sequencer.
7. Start playback of the recorded song on the HP 337.
The recorded performance message is transmitted to the
MIDI sequencer.
8. When playback of the song is finished, stop
recording on the MIDI sequencer.
9. Save the data on the connected MIDI sequencer.
51
seoinag
i?)
fe)
3
5
fey
Q =
a
m
a
5
3
»
Advertisement
Table of Contents
