Roland HP 337 Owner's Manual page 24

Playing the Keyboard
Adding Reverberation to Sounds (The Reverb Effect)
The HP 337 allows you to add reverberation to what you play on the keyboard.
With the reverb effect, you can get a pleasant reverberation, making it sound as if you
were performing in a concert hall or similar space.
1,2
I. Press the [Reverb] button, and confirm that its indicator has lighted.
The reverb effect is applied to the entire sound.
2. Pressing the [Reverb] button once more turns off the button's
indicator and cancels the reverb effect.
Changing the Depth of the Reverb Effect
The depth of the reverb effect can also be adjusted. There are ten levels of depth from
which to choose.
Reverb is set to "5" when the keyboard is turned on.
1. Hold down the [Reverb] button while you press the Variation [+] or [-]
button to adjust the reverb depth.
As this value is increased, the reverb will be applied more intensely.
|
The depth of the reverb effect cannot be set for each tone individually. The
note effect is applied to all tones at the same depth.
The following method can also be used to adjust the depth of the reverb
I. Press the [Function] button.
The [Function] button's indicator starts blinking.
2. Press the [Reverb] button.
3. Using the Variation [+] and [-] buttons, adjust the depth of the reverb.
4. Press the [Function] button.
The [Function] button's indicator goes out.
24