Connecting Connector X2 (In) And X3 (Out) (Field Bus); Optional: Connecting Connector X5 (Current Transformer) - Koch PxtMX Operating Manual

5.3
5.4

Connecting connector X2 (In) and X3 (Out) (field bus)

The fieldbus connection cables must comply with industrial and local safety
requirements.
The specific requirements can be found in the manufacturer specifications for the
fieldbus devices.
Fig. 16: Connector X2 and X3 (field bus)

Optional: Connecting connector X5 (current transformer)

The connecting cable is assembled ready for connection and supplied with 10 metres
of standard length.
For longer lengths, consultation with Michael Koch GmbH is required.
Fig. 17: Connector X5
5 Commissioning
Operating manual Plug-on module PxtMX
V1.0DE/EN
23