Commissioning; Connecting Connector X1 (Digital I/O) - Koch PxtMX Operating Manual

5 Commissioning

5
5.1
Basic information
Pin 1 + 2
Pin 3 - 8
18
Operating manual Plug-on module PxtMX
V1.0DE/EN
C
OMMISSIONING

Connecting connector X1 (digital I/O)


Fig. 11: Connector X1
• The active levels of all inputs and outputs are configured to "HIGH active" by
default.
• The voltage level swing is 24 VDC.
• Each individual input and output can be configured individually by the customer.
• The GND potential of the supply voltage and GND of the digital signals must be
directly connected.
24 V external ±15% (min. 8 V if only parameterisation is required).
Via the digital inputs and outputs, certain functions can be switched on or over and
status messages can be evaluated.
In addition to the standard functions listed below, the possible options depend on
the task and may have to be defined.