Installing The Plug-On Module Pxtmx - Koch PxtMX Operating Manual

4.5
Basic information
Installation

Installing the Plug-on module PxtMX

Risk of damage!
The PxtRX or PxtFX unit on which the PxtMX is to be mounted
must be switched off (de-energised).
• The Plug-on module PxtMX is intended to be installed in an electrical cabinet.
• The Plug-on module PxtMX must be protected against the penetration of foreign
bodies due to the installation into the cabinet.
• The device is mounted directly on the mounting surface provided on the PxtFX or
PxtRX.

Fig. 10: Installation
Switch off the PxtRX or PxtFX device on which the PxtMX is to be mounted.


Loosen 2 screws and remove the metal emblem


Place the PxtMX so that the connector X4 engages in the socket

Screw the PxtMX in place using the fixing screws supplied.

Check that it is firmly seated.

4 Transport / Storage / Installation





.

Operating manual Plug-on module PxtMX
V1.0DE/EN
.
17