Advertisement
Quick Links
Advertisement
Related Manuals for Canor Virtus I2
Summary of Contents for Canor Virtus I2
- Page 2 CANOR Virtus I2 integrated tube amplifier user manual Dear music lover, thank you for purchasing our CANOR Virtus I2 integrated tube amplifier. To preserve and maintain the best characteristics of your amplifier, we recommend you carefully read the following lines.
- Page 3 The distance from the back wall of the unit may not be less than 20 cm, and 20 cm above the Virtus I2 may not be any barrier. Alongside the unit should be ensured 20 cm minimum distance from other objects.
-
Page 4: Front Panel
Remote Control Do not expose the sensors of your remote control to direct sunlight or to other strong light sources. Remote control operates at an angle of 60 ° to about 5 meters. Aim your remote control at the sensor on the device. There may not be any obstacles in the way between the sensor and the remote control. -
Page 5: Back Panel
Plug the power cord in Virtus I2. Turn on the Virtus I2 with the Power Main switch, which is located on the back panel. When you turn on the main switch, the Virtus I2 will be set into standby mode - the red LED diode on the front panel lights up. -
Page 6: Important Note
1.10 can thus be used as an integrated stereo amplifier and as a monoblock. Attenuators ensure absolute channel concurrence. How it works: Two Virtus I2 get connected by an RJ45 data cable via a C-link bus. The switch next to the C-Link connector will determine the Master unit and Slave unit. At this moment one amplifier becomes a MASTER and the other one a SLAVE. - Page 7 www.canor-audio.com...