Related Manuals for Canor HYPERION P1
Summary of Contents for Canor HYPERION P1
- Page 2 / www.canor-audio.com CANOR HYPERION P1 tube preamplifier user manual Dear music lover, thank you for purchasing our CANOR HYPERION P1 tube preamplifier. To preserve and maintain the best characteristics of your amplifier, we recommend you carefully read the following lines.
- Page 3 The distance from the back wall of the unit may not be less than 20 cm, and 20 cm above the area of HYPERION P1 may not be any barrier. Alongside the unit should be ensured 20 cm minimal distance from other objects.
-
Page 4: Front Panel
FRONT PANEL: POWER – turning on and off the amplifier ▲ – input selector ▼ – input selector MUTE – instant muting of the volume / subsequent pressing results in default volume FIX.OUT – activates fixed outputs: XLR = IN4 or RCA = IN9 The display indicates: NO FIX / RCA FIX / XLR FIX ... - Page 5 Plug the power cord into HYPERION P1. Turn on the preamplifier with the Power Main switch, which is located on the back panel. When you turn on the main switch, the HYPERION P1 will set into standby mode - the red LED diode on the front panel lights up. After pressing the Power button on the front panel, the controlled turning-on sequence gets initiated, which consists of cooling and preheating the tubes, thereby extending their life span.
-
Page 6: Specifications
Specifications: Gain (XLR OUT): 11 dB Output Impedance: < 150 Ohm 10 - 80 000Hz ± 0,1dB Frequency response: Input impedance: 30 kOhm Inputs: 4 x XLR / 5x RCA (one pair selectable as FIX.OUT) Outputs: 2 x XLR / 1x RCA Total Harmonic Distortion: <0,005% (1 kHz, 2V RMS) XLR <0,1% (1 kHz, 40V RMS) XLR... - Page 7 www.canor-audio.com...