Download Print this page

Canor PH 2.10 User Manual

Phono tube preamplifier

Table of Contents

Need help?

Do you have a question about the PH 2.10 and is the answer not in the manual?

Page 2 CANOR PH 2.10 phono tube preamplifier user manual Dear music lover, thank you for purchasing our CANOR PH 2.10 Phono Tube Preamplifier. To preserve and maintain the best characteristics of your preamplifier, we recommend you carefully read the following lines.
Page 3 The distance from the back wall of the unit may not be less than 20 cm, and 20 cm above the area of PH 2.10 may not be any barrier. Alongside the unit should be ensured 20 cm minimal distance from other objects.
Page 4 CANOR PH 2.10 is a tube phono preamplifier for both MM and MC phono cartridges and is equipped with a high-quality MC step-up Lundahl transformer. It contains minimum number of amplification steps required to apply purely passive corrections. The PH 2.10 is designed with regard to the highest possible audio quality. The overall electrical and mechanical construction is tailored to achieve this ultimate goal.
Page 5 Basics Plug the power cord in PH 2.10. Turn on the PH 2.10 with the Power Main switch, which is located on the back panel. When you turn on the main switch, the PH 2.10 will set into stand-by mode - the red LED diode on the front panel lights up.
Page 6 www.canor-audio.com...