Connect The Ethernet Or Usb Cable; Ethernet; Usb; Establish A Dial-Up Connection - US Robotics USR9002 Quick Installation Manual

Connect the Ethernet or USB Cable

Follow the instructions below for the connection type (Ethernet or USB) you
selected in Step 2.

Ethernet

• Insert one end of the Ethernet
cable to the "ENET" port on the
back of the U.S. Robotics SureCon-
nect ADSL USB/Ethernet Modem.
Connect the other end of the Ether-
net cable to the Ethernet port on
your computer's 10/100 network
interface card.
• The modem will begin an initializa-
tion sequence. This may take a minute.
• The installation of the U.S. Robotics SureConnect ADSL USB/Ethernet
Modem is complete. Click Finish, and remove the CD-ROM from the
CD-ROM drive of your computer.
If your ISP gave you software to install, do so at this time. Be sure to
read and follow all of the installation instructions provided. Once the
software is installed, you may need to establish a dial-up connection
in order to access the Internet. If your ISP gave you software to
install, a user name and password should have also been assigned.
8
Windows XP, 2000
Windows XP
A Found New Hardware Wizard screen for both t
Install Software Automatically
will display. Select the
Next.
Windows 2000
A screen will confirm when each device has been installed. Click Finish to
continue to install the software required to operate the modem.
• After the modem is detected, you will need to restart your computer.
Select Yes, I would like to restart my computer now then click Finish.
• After restart, a window will display confirming that the modem driver
has been installed, click Next.
• The installation of the U.S. Robotics SureConnect ADSL USB/Ethernet
Modem is complete. Click Finish and remove the CD-ROM from the
CD-ROM drive of your computer.
10
8
he Loa
der and the Adapter
option and click
10
Some Internet Service Providers require additional soft-
ware be installed for optimum performance. If your ISP
requires additional software, it will be installed when you
click Finish.
The Registration screen displays once you have established a connection. You
can test your connection by registering your modem. Click Yes to register your
modem, and you will be brought to the U.S. Robotics Web site.

USB

• If you have chosen to connect via the USB port, insert the rectangular
end of the included USB cable into the USB port of the computer, and
the square end of the cable into the port labeled "USB" on the U.S.
Robotics SureConnect ADSL USB/Ethernet Modem.
• The Found New Hardware Wizard will display, and the new hardware
will begin to install. Follow the New Hardware Wizard's on-screen
instructions to complete the installation of the hardware. If the New
Hardware Wizard does not display, refer to the "Troubleshooting" sec-
tion of this Quick Installation Guide.
Windows XP, 2000, & Me
Windows XP
A software installation warning will display stating that the soft-
ware you are installing has not passed the Windows logo testing.
Click the Continue Anyway button.
Windows 2000 and Me
A Digital Signature Not Found screen may appear. Click
tinue with the installation.
U.S. Robotics has thoroughly tested this driver in conjunction with the support
hardware and has verified compatibility with Windows XP, 2000, & Me.
9
If your ISP gave you software to install, do so at this time. Be sure
to read and follow all of the installation instructions provided. Once
the software is installed, you may need to establish a dial-up
connection in order to access the Internet. If your ISP gave you
software to install, a user name and password should have also
been assigned.
Some Internet Service Providers require additional soft-
ware be installed for optimum performance. If your ISP
requires additional software, it will be installed when you
click Finish.

Establish a Dial-up Connection

Double-click the dial-up networking icon that has just been created. It
will be located on your desktop. If the networking icon is not available
on your desktop, follow the instructions below for your operating
system in order to locate the networking icon.
11
to con-
Yes
9
11