User Maintenance Instructions - XPower A-2B Owner's Manual

User Maintenance Instructions

Frequent maintenance is recommended on this appliance. Failure to follow the
maintenance instructions may cause failure of the appliance and void the warranty.
• When not in use, unplug and store the appliance in a dry and cool indoor place. Make
sure it's out of reach of children.
• Before performing any maintenance or cleaning, always disconnect the Cyber Duster
from its power source.
• Use a damp cloth to wipe the surface of the housing. Do not clean the unit with water
directly.
• Check if the air inlet and outlet are clean. Remove dirt or any other objects that could
block the air inlet and air outlet.
Filter Maintenance
Nozzle Attachment Maintenance
• Use water to remove dirt or any other objects on the nozzle attachments. Pay attention
to the possible hidden dirt on the standard brush and detail brush.
• Dry the nozzle attachments in natural wind or with the Cyber Duster.
• Store the nozzle attachments in the nozzle pouch out of reach of children.
Battery Maintenance （ For Model A-2B only ）
• When not in use for a long time, please charge the battery until full before storage. It's
recommended to charge the battery at least once every 3 months.
• DO NOT disassemble this machine on your own. DO NOT disassemble the battery. If
the machine or battery malfunctions, refer to the Troubleshooting Guide.
Disposal of the Battery
• This product contains lithium ion batteries. Special disposal methods may be required
local disposal regulations.
There is one filter on the bottom (intake)
of the machine. To ensure the best
performance, you should clean or replace
the filters frequently. (See Also Page 3: Parts
Description).
English - 11