Subscribe to Our Youtube Channel
Related Manuals for XPower BR-18L
Summary of Contents for XPower BR-18L
- Page 1 AIR COLUMN BLOWER OWNER’S MANUAL BR-18L XPOWER Manufacture, Inc. 220 Clary Avenue San Gabriel, CA 91776, USA Tel: 626-285-3301, Fax: 626-285-3302 www.xpower.com...
- Page 3 XPOWER Air Column Blower BR-18L is designed for advertising inflatable market and special event's décor uses. Features: • Low power draw with air flow 160 CFM • Super compact and lightweight motor design • 10 ft. power cord length • Easy cord wrap •...
- Page 4 1. XPOWER Air Column Blowers are shipped ready-to-use. Before plugging the unit into the power source, inspect completely for any shipping damage. 2. Snugly attach the inflatable dancer around the Velcro strap on the blower housing. 3. Carefully place the Air Dancer Blower unit on a stable, flat dry surface.
- Page 5 WARNING: IMPORTANT SAFETY PRECAUTIONS! PLEASE READ COMPLETELY BEFORE USING PRODUCT! When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and personal injury, including, but not limited to the following: 1. To prevent electric shock, do not operate the unit in standing water. Never plug in or unplug the unit with wet hands or while standing in water.
-
Page 6: Motor Not Running
1. To keep the Blower clean, use a damp cloth to wipe the surface of the housing. 2. Never clean the Blower directly with water. 3. When not in use, unplug and store the Blower in a dry indoor place. 4. - Page 7 Model BR-18L Volt / Frequency 115 V, 60 Hz Power 1/7 HP 0.92 Amps Weight (unit / package) 9.3 Lbs . / 12.3 Lbs . Speeds Size (H x W x D) 20.1 x 20.1 x 6.7 i nch Cord Length 10 Ft.
- Page 8 XPOWER Service Department. XPOWER will inspect, assess and advise the repairs needed and the applicable cost, if any. For users outside the US, please contact an XPOWER Distributor in your country or region for Warranty service and parts replacement.
- Page 9 Parts List Item No. Parts Name Upper cover Motor Lower cover Capacitor Base LED light base assembly Switch Switch sleeve Switch case Power cord Wheels...
- Page 10 Accessory Remote Controller for LED 1. Increase LED brightness 2. Decrease LED brightness 3. OFF: turn off LED 4. ON: turn on LED 5. FLASH: fast flash setting 6. STROBE: slow flash setting 7. FADE: fast fade setting 8. SMOOTH: slow fade setting 9.
-
Page 11: Warranty Registration
Warranty Registration (for US user only) For your product warranty, please complete and mail / fax this form to XPOWER MANUFACTURE, INC. Address: 220 Clary Ave., San Gabriel, CA 91776. Tel: 626-285-3301 Fax: 626-285-3302 (For your convenience, register your product online at xpower.com)
Need help?
Do you have a question about the BR-18L and is the answer not in the manual?
Questions and answers