Maintenance Instructions; Troubleshooting - XPower PL-700A Owner's Manual

Safety Instructions
10. Always place the Low Profile Air Mover on a smooth and level surface for safe operation.
11. Any misuse or abuse of this product will void its warranty.
12. It's automatically operated device. To reduce the risk of injury disconnect from power supply
before servicing.

Maintenance Instructions

1. To keep the Low Profile Air Mover clean, use a damp cloth to wipe the surface of the housing.
2. Never clean the Low Profile Air Mover with water.
3. When not in use, unplug and store the Low Profile Air Mover in a dry indoor place out of reach
of children.
4. Always disconnect the Low Profile Air Mover from its power source before cleaning,
disassembly, or servicing,
- 6 -

Troubleshooting

PROBLEM POSSIBLE CAUSE
No power input / Switch not
turned on
Low Profile Air Mover not
Intake or exhaust blocked
running
Fan jammed
Wiring failure / Motor Failure
Low Profile Air Mover
Fan jammed / broken
vibrates / makes noise
SOLUTION
Check outlet / switch to another
outlet, make sure unit is plugged
in and switch is turned on.
Turn unit off to cool down, then
remove blockage
Remove material jamming the fan
contact XPOWER Customer
Service
Remove material jamming the
fan or contact XPOWER Customer
Service
- 7 -