Panasonic BB-HCM381CE Service Manual page 33

10. Remove the FFC (1) and FFC (2) from the
Connector.
11. Remove two Screws (B). And remove the Lens
Board.
12. Remove two Screws (A3). And remove the Video
Board.
13. Remove three Screws (E). And remove the CCD
Unit from the Lens Guide Ass'y.
10. THE CAUTIONS AT THE TIME OF ASSEMBLY
10.1. FFC (VIDEO-CCD)
10.2. LEAD WIRE
1. Bind two position of the Pan Motor lead to measure as illustrated in the
figure.
2. Fix the Pan Motor, and (D) four parts securely.
Caution:
Through the locating pin of the cabinet to the locating hole.
3. Wire the lead of the Pan Motor as illustrated in the figure.
33