Advertisement
5. Remove the FFC (1), FFC (2) and FPC from the
Connector.
6. Remove two Screws (A). And remove the Video
Board.
7. Remove two Screws (B). And remove the Lens
Board.
8. Remove two Screws (36-4). And remove the CCD
Board.
9.4. DISASSEMBLY INSTRUCTIONS (CCD UNIT)
1. Remove the Tilt Board Spacer.
2. Remove two Retaining Rings and three Spacers.
3. Remove Tilt Block Ass'y (Camera Unit) to under
direction.
30
Advertisement
