Advertisement
Pallet) to the highest selection possible.
Note:
Optimum video viewing will be seen when the color quality is set to 24bit or higher. This change should
not cause any problems with other applications on your PC.
7.2. CONNECTING THE NETWORK CAMERA
When checking the operation of the network camera, set up a configuration to be either of the two
connecting patterns described below. For a configuration to be set up when connecting to the Internet,
refer to the Operating Instructions.
Use Category 5 cross cable when connecting directly to the PC.
7.2.1. Wired Connection
7.3. NETWORK CAMERA SETTING
To access the network camera from a PC under the 6.2. CONNECTING THE NETWORK CAMERA, it is
required to make the network settings of the PC consistent with those of the network camera.
Using the setup CD-ROM, search the information from the PC about the network settings of the network
camera. Make the settings (IP address and subnet mask) of the network camera consistent with those
18
Advertisement
