6.1. FRONT VIEW
Indicator
Power on Not on the LAN
On the LAN
Normal Operation *1
Automatic
Setting
Setup
Finished setting
Using
Getting IP address *2
DHCP
Got IP address
Updating Firmware
Pressing FACTORY DEFAULT
RESET button
UPnP Failure
Internal Failure
* 1) The indicator turns orange if the camera is not connected to the LAN.
* 2) The indicator blinks orange if the camera is not connected to the LAN.
6.2. REAR VIEW
Orange blinking
Orange blinking Green blinking
Green
Green
Green blinking
Green blinking Green
Green blinking
Green
Orange blinking
Orange blinking Turning off
(The camera restarts after that.)
Orange blinking (About a 2-second
interval)
Red blinking
15