Installing The Monitor Driver In Windows 11 - Lenovo ThinkVision 27 3D User Manual

Installing the monitor driver in Windows 11

To use the Plug and Play feature in Microsoft Windows 11, do the following:
1� Turn off the computer and all attached devices�
2� Ensure that the monitor is connected correctly�
3� Turn on the monitor and then the system unit� Allow your computer to start the Windows
11 operating system�
4� From the Lenovo website https://pcsupport�lenovo�com/solutions/27_3d, find the
corresponding monitor driver and download it to a PC to which this monitor is connected
(such as a desktop)�
5� On the Desktop, move the mouse to the bottom-right corner of the screen, choose
Setting, double click Control Panel, then double click the icon of Hardware and
Sound, and then click Device Manager�
6� Click the Monitor tab�
7� Click the Properties button�
8� Click the Driver tab�
9� Click Update Driver, then click Browse the computer to find the driver program�
10� Select Pick from the list of device driver program on the computer�
11� Click the Hard Disk button� By clicking the Browse button and navigate to the directory
that you put your download drivers in�
12� Select the "27 3D.inf" file and click the Open button� Click the OK button�
13� In the new window, select 27 3D, and click Next�
14� After the installation is completed, delete all downloaded files and close all windows�
15� Restart the system� The system will automatically select the maximum refresh rate and
navigate to the following directory corresponding Color Matching Profiles�
Note: On LCD monitors, unlike CRTs, a faster refresh rate does not improve display quality�
Lenovo recommends using either 3840 × 2160 at a refresh rate of 60 Hz, or 640 × 480 at
a refresh rate of 60 Hz�
Getting further help
If you still can't solve your problem, please contact the Lenovo Support Center� For more
information on contacting the Support Center, please see "Appendix A� Service and
Support" on page A-1
Chapter 3� Reference information 3-6