Using The Product - TESTO 606-2 Instruction Manual

3 Press (
4 Repeat steps 2 and 3 for all functions.
- The instrument changes to measuring mode.

Using the product

To guarantee correct readings:
· Repeat the measurement at several points. Always measure wood
moisture across the grain.
· Keep temperature and humidity sources which may falsify the
measurement (e.g. hands) away from the sensor.
Switching t t he i i nstrument o o n:
Press .
- Measuring mode is opened.
Switching t t he d d isplay l l ight o o n:
The instrument is switched on.
Press .
- The display light goes out automatically if no key is
pressed for 10 seconds.
Setting t t he m m aterial c c haracteristic c c urve:
The material moisture is indicated in the top line of the
display. The material symbol
material) is displayed with the relevant material number (see
enclosed sticker for the inside of the protective cap).
Einstellbare Materialien
· 1. beech, spruce, larch, birch, cherry, walnut
· 2. oak, pine, maple, ash-tree, douglas fir, meranti
· 3. cement screed, concrete, plaster
· 4. anhydrite screed
· 5. cement mortar
· 6. lime mortar
· 7. bricks
Press several times until the desired material
characteristic curve appears.
) to confirm the input.
Using the product 15
(wood) or (building