Patch Transfer Between Internal Memory And The Cartridge Memory - Roland GR-700 Owner's Manual

c. Patch Transfer between Internal Memory and the Cartridge Memory
1) If you wish to transfer a patch program in the
GR-700's memory onto the Memory Cartridge,
do as follows.
@ Call an internal patch program you wish to
transfer to the cartridge.
@ Turn Cartridge Switch @ on.
O) Press the Memory Write Switch @ to turn
the GR-700 to the Write mode.
@ Set the Protect Switch on the Memory Car-
tridge to the OFF position.
®© Assign the Patch Program number on the car-
tridge where you wish to transfer the patch
program from the internal memory, by using
the Bank Pedal @ and Number Pedal @.
© Set the Protect Switch of the Memory Car-
tridge to the ON position.
Protect OFF
Roland
= e e
Els 00
wur iss
a
Loading
28
A A A ON OF iol GUT PROGRAMMER
Use ser
OOOO OHA
2) If you wish to transfer a patch in the Memory
Cartridge into the internal memory of the GR-
700, do as follows.
O Turn the Cartridge Switch @ on, then call
the patch program you wish to transfer to
the internal memory.
@ Set the Memory Protect Switch @ to the
OFF position.
@ Press the Memory Write Switch @ to turn
the GR-700 to the Write mode.
@ Assign the internal patch program numbers
where you wish to transfer the patch program
from the Memory Cartridge, by using the
Bank Pedal @ and the Number Pedal @.
() Set the Memory Protect Switch @ to the ON
position.
* The moment the Patch number is assigned,
writing is done, then the GR-700 is automat-
ically turned to the Play mode.
KB Roland
Memory Cartridge E
M-16C
GUITAR INPUT MEMORY CARTRIDGE POWER
Protect OFF
GAR- 700 curer SYNTHESIZER