Normal Operation; Outdoor Use - U-Line CLR2060 User Manual

The ice maker is designed to make clear ice from most water sources
on a consistent basis. Water is constantly circulated over the evapo-
rator assembly. As the water freezes, gravity causes any sediment to
drop into the water trough and not become imbedded in the ice. This
gives a clearer ice cube with a low mineral content.
When the ice reaches the desired thickness, it falls off the evaporator
and into the storage bin. The cycle is then repeated. When the level of
ice reaches the top of the storage bin the unit shuts off. As the ice level
in the bin drops the unit will automatically restart to keep the bin full.
Your unit's ice production rate may vary depending on many consider-
ations. Ambient air temperatures, water temperatures, condenser
cleanliness and ice-maker cleanliness are all contributing factors to how
quickly the unit produces ice.
Certain sounds are normal during the unit's operation. You may hear
the compressor or fan motor, the water valve, the water circulation
pump or ice dropping into the ice storage bin.
Some CLR2060 models are designed to operate outdoors. Special
considerations include the following:
• For best performance, keep the unit out of direct sunlight.
• Turn the unit OFF and dispose of any ice cubes if the unit will not be
used for 5 days or more. Prop door open to allow for air circulation
and prevent mold and mildew.
• If the ambient temperature is expected to drop below 45°F, drain all
water from the unit to prevent freezing damage not covered by the
warranty.
• High ambient temperatures (110°F or higher) may reduce the unit's
ability to reach low temperatures and may also reduce the ice
production rate.

NORMAL OPERATION

OUTDOOR USE

21