Technics SC-EH750 Operating Instructions Manual page 23

Listening to: compact discs [For SC-EH550
by remote. control anly
This function allows you to program up to 24 tracks.
i Press [CD].
PB] Press [PROGRAM].
Je] Press the numeric button(s) to select the track
you want to play in the desired sequence.
To select a two-digit track:
Press [2 10/+/-] and then the two numbers you want.
4 Repeat step —] until you have programmed all
the tracks you want.
Press [>].
Play will start in the programmed sequence.
Play will stop automatically when all the programmed tracks
have been played.
To cancel program play mode:
Press [PROGRAM].
"CLEAR" will appear on the display for approximately 1 second and
all the programmed tracks will be cancelled.
When "FULL" appears:
The number of programmed tracks is limited to 24. No further tracks
can be programmed.
;
:
5
When "~~—:--" appears:
The total playing time of the programmed tracks has exceeded
99 minutes 59 seconds, or you tried programming a track which is
numbered 25 or more. In any case, you can still program and play
discs.
You can do the following during program play.
eCheck program contents.
1. Press [CANCEL].
"CANCEL" will light.
2. Press {hid /<44] or [>/mP I]. Every time you press one of the
buttons, the track and program No. are shown on the display.
3. After the total playing time appears on the display, press
[CANCEL]. "CANCEL." goes out.
Add to the program.
Repeat step El.
Cancel entries.
; A specific track only:
CANCEL \ @ Press [CANCEL]. "CANCEL" will light.
x @ Press the numeric button(s) of the track you want to cancel, or
press [It /-4-<4] of [>/PP1] to select the track you want to
cancel and then press [CANCEL].
' i ny te ee Hap @ Press [CANCEL] once again. "CANCEL" goes out,
Hy = ii Calica : All tracks:
eS ee Press [PROGRAM], or press [@] while play is stopped.
=~)
For your reference:
To program the track you are listening to:
If you press [PROGRAM] during playback, the program mode will en-
gage and the current playback track will be automatically recorded as
program No. 1.
RQT4970