Technics SC-EH750 Operating Instructions Manual page 17

DIRECT OPEN
CEE) GEeD
OPEN/CLOSE Dise Number Total playing
number oftracks time
12cm CD
Listening to compact discs
For SC-EH750
Always stop the changer before loading or changing CDs. You can-
not change CDs while a disc is playing.
1 Press [DISC 1]-[DISC 5], whichever you want
to open.
2 Set the CD in the tray.
Repeat steps {JJ and BJ to load the other trays.
Press [4 OPEN/CLOSE].
The tray will close and the disc No., number of tracks and total
playing time will be shown on the display.
| To prevent damage
Always observe the following points.
@Load only 1 CD per tray,
Load CDs as shown in figure Ej.
An adapter is not needed with 8 cm CDs (singles).
®Set the system on a flat, level surface.
Do not set it on top of magazines, inclined surfaces, etc.
*Do not move the system while trays are opening/closing, or when
loaded.
Always unload all trays before moving the system.
#Do not put anything except CDs in trays.
Do not use cleaning CDs or CDs which are badly warped or
cracked,
Do not use CDs with poorly attached labels or stickers. Adhesive
protruding from underneath stickers or left over from peeled off
stickers can cause the system to malfunction.
Do not use irregular shaped CDs,
5
5
$
R
g
i
RQT4970