Paragraph Indentation; Automatic Carrier Return; Syllable Hyphen - Royal SCRIPTOR II Operation Manual

I )..
..
PARAGRAPH INDENTATION
• It is possible to set a temporary left margin.
■
1)
2)
Move the carriage to the position where you want to set the
temporary left margin.
Wh ile holding down the Code key, press the Express
(INDENT) key. The "T" mark will appear above "INDENT"
on the display, indicating that the current position has now
been set as a temporary margin.
3) Type the text that you want indented.
_.. To release the temporary left margin, hold down the Code
key and press the Express (INDENT) key again. The
"T"
mark above "INDENT" disappears.
AUTOMATIC CARRIER RETURN
INDENT
I
CODE
I
+
I
EXPR
I
y
NP
◄
62
y
INDENT
• This function makes it possible to type continuously and have the carrier/cursor automatically return to the start of
the next line without having to press the Return key at the end of each line.
■
1)
While holding down the Code key, press the Return (AUTO
RET) key. The "T" mark will appear above "RETURN" on
the display.
2) Once this function is activated, the typewriter will beep
when the carrier enters the auto return zone (the five
spaces to the left of the right margin). When a hyphen or
space is typed in the autoreturn zone, the carriage/cursor
automatically returns to the left margin on the next line.
_.. In order to release this function, hold down the Code key
and press the Return (AUTO RET) key again the "T" mark
above "RETURN" disappears.
,.. (For the typewriter with USA or Canada French keyboard)
If a hyphen or space is not typed in the hot zone, the
carriage will advance past the right margin.
REQUIRED HYPHEN AND REQUIRED SPACE
I
CODE
I
+
~ETURN
I
◄ 62
y y
LP
RETURN
• This function allows you to input a hyphen or space within the auto return zone without triggering the auto return
function.
■ 1)
Hold down the Code key and press the (HYPHEN) key at
the position where you want the required hyphen. On the
display, the" ~" mark appears, representing a required
hyphen.
2)
Hold down the Code key and press the space bar at the
position where you want the requi•eo space. On the
display, the" ~ " mark appears. representing a required
space.
SYLLABLE HYPHEN
• This function allows you to hyphenate • , •,ords at the right margin .
*
Syllable hyphens are available in STORE mode only.
■
Hold down the Code key and press the
·w
key. The
"H"
mark appears on the display, representing a syllable
hyphen.
As this manual goes to press, the syllable hyphen is printed
only when ii falls in the auto return zone. If you modify the
file and the hyphenated word shifts out of th e autoreturn
zone, the syllable hyphen is ignored and is not printed.
I
CODE
I
+
l]
I
CODE
I
+
I
CODE
I
+
[EJ
7