Key Functions - Royal SCRIPTOR II Operation Manual

KEY FUNCTIONS
MARGIN RELEASE K E Y - - - - - - - - - . . . J
Releases the margin setting so that you can type
beyond the margin or set new margins.
TAB K E Y - - - - - - ~ - - - - - - - _ J
Moves the carriage to the next tab position.
SHIFT LOCK K E Y - - - -- - - - - ---------l
When ty~ing a string of capital letters, press this key to
lock the Shift key. When locked, the Shift LED (rea)
lights. The lock can be released by pressing either of the
Shift keys.
SHIFTKEY--- - -- - - -- - - - - - - - - l
Press this key to type in capital letters or to type the
symbol on the upper portion of a key.
LEFT/RIGHT MARGIN SET KEYS _ _ _ _ __ _ _ _ _
...J
Sets a new margin. Move the carriage to the position
where you want to set the new margin. Press the MAR
LEFT key to set the left margin. Hold down the Code key
and press the MAR LEFT key to set the right margin.
When a new margin is set.the typewriter beeps.
• When setting new margins, the display must be clear.
Furthermore, new margins can not be set when the
Auto Center or Decimal Tab functions are active.
• The left and right margins must be set at least one
inch apart.
When the typewriter is turned on, the auto margin
function is set.
Left Marain
Riaht Marain
10 pitch (PICA) 10
75
12 pitch (ELITE) 12 90
15 pitch (MICRO) 15 113
SPACE BAR _ _
__J
Press once gently to move the carriage
one space. Holding down the Space Bar
causes the carriage to move
continuously.
CODE KEY
Press this key along with another key in order
to use a special function.
TAB SET/CLEAR KEY
This key is used to set and clear tabs.
Move the carriage to the position where you want to set
a tab and then press the Tab Set key. The typewriter
then beeps to indicate that the tab has been set. Up to
16 tab positions can be set.
To clear a tab, move the carriage to the tab to be
cleared and then press CODE+ TAB SET/CLEAR. The
typewriter then beeps to indicate that the tab has been
cleared.
<
that can be used by pressing the Code key together with other keys
>
Paper Eject < CODE
+
(ID
>
Autom~ic Full U_nderline < CODE
+(I] >
This function automatically ejects the paper. Thts function underlines all characters (including spaces) that
HALF BACK
are typed. Press CODE + 4. The
"T"
mark appears above
Halt Back <CODE+ ~ -- ....,
>
the symbol "XX"on the display. To release this function, press
Hold down the Code key and press the HALF BACK key. The CODE+ 4 again. The "T' mark above the symbol "XX" on
carriage moves a half space to the left. This function can only
th e display
disappears.
be used in NP mode.
Automatic Word Underline
< CODE + [[]
>
Line Spacing < CODE
+
~
> This function underlines each word that is typed. Press CODE
This function allows you to set the line spacing. Press CODE +. 5. The "T" mark appears above the symbol
"XX"
on the
+ 2. "LINE SP 1 1.5 2" appears on the display. To change the display. To release this function, press CODE + 5 again. The
line spacing, hold down the Code key and press the "2" key
'T "
mark above the symbol "X X"on the ~lay disappears.
again. Each time the "2" key is pressed, the line spacing Automatic Centering
<
CODE
+
l_gJ
>
changes. Each time the setting changes, the new setting This function allows you to center your typing between the left
begins to blink. When the Code key is released, the current and right margins. While holdin~ down the Code key, press
setting becomes the line spacing and the typewriter exits the the key with the label "CENTER on the side. When this
line spacing setting mode. function is turned on, the carriage/cursor automatically moves
Print Pitch < CODE
+
'al
>
to the center point between the two margins. After inputting
Th's f n
f
t th ·t h ~ d · h h · h
I
the characters that you want to type, press the Return key.
1 u c ,on se s e P 1 c ,n accor ance wit t e pnntw ee · (The text that was entered appears on the display.) The text is
Press CODE + 3. "PITCH 1 O 12 15" appears on the display.
To change the print pitch, hold down the Code key and press printed in the center between the left and right margins, the
the "3" key again. Each time the "3" key is pressed, the print carriage/cursor returns to the left margin on the next line, and
pitch changes. Each time the setting changes, the new the function is then released.
setting begins to blink. When the Code key is released, the • To cancel this function before printing anything, use the
current setting becomes the print pitch and the typewriter exits Correction key to erase the text on the display and press
the print pitch setting mode. the Return key.
• This typewriter is equipped with a memory backup battery
Right Margin Flush
<
CODE
+
iRl
>
that allows it to retain the line spacing and print pitch It is possible to print text so that the r i ght edge of the text is
settings for approximately five yea rs with the power flush with the right margin. Press CODE + R.
turned off. "RIGHT MARGIN FLUSH" appears on the display and the
Bold < CODE
+
[§]
>
carriage/cursor moves to the right margin. Input text and then
This functions prints characters in bold type. This function is press the Return key. (The input text appears on the display.)
useful for titles and for emphasizing important information. The.text is printed so that it is flush with the right margin, the
Press CODE+ 6. The "T" mark appears above the word carnage/cursor returns to the left margin of the next line, and
"BOLD" on the display, indicating that the "Bold" function is this function is then released.
set. To r~lease this function, press CODE + 6 again. The "T " • To cane:el this function before printing anyth ing, use the
mark above the word "BOLD" on the display disappears. Correction key to erase the text on the display and press
the Return key.
4