Fuse Replacement - Yamaha VIKING 2015 Owner's Manual

4. Connect the negative lead of the jumper
cable to the negative terminal of the
charged battery and the other end of the
negative lead to an unpainted metal sur-
face of the frame of the vehicle to be
started.
8
1. Jumper cable negative lead
5. Start the engine. (Refer to "Starting the
engine" on page 6-2.)
6. After the engine starts, disconnect the
negative lead of the jumper cable from
the frame and charged battery, and then
disconnect the positive lead of the jump-
er cable from the charged battery and the
battery in the vehicle.
7. Install the hood.
EBU32660

Fuse replacement

The main fuse, the fuel injection system fuse,
the EPS fuse (for EPS model), and the fuse
box are located under the hood. (See page
8-10 for hood removal and installation proce-
dures.)
1
8-46