Differential Gear Oil - Yamaha VIKING 2015 Owner's Manual

4. Install the drain bolt and its new gasket,
and then tighten the bolt to the specified
torque.
Tightening torque:
Final gear oil drain bolt:
22 Nm (2.2 m·kgf, 16 ft·lbf)
5. Refill with the recommended final gear oil
up to the brim of the filler hole. NOTICE:
Be sure no foreign material enters the
final gear case.
Recommended oil:
SAE 80 API GL-4 Hypoid gear oil
8
Oil quantity:
0.40 L (0.42 US qt, 0.35 Imp.qt)
6. Check the oil filler bolt gasket for dam-
age, and replace it if necessary.
7. Install the oil filler bolt and its gasket, and
then tighten the bolt to the specified
torque.
[ECB00422]
Tightening torque:
Final gear oil filler bolt:
23 Nm (2.3 m·kgf, 17 ft·lbf)
8. Check for oil leakage. If oil leakage is
found, check for the cause.
EBU32380

Differential gear oil

Checking the differential gear oil level
1. Park the vehicle on a level surface.
2. Remove the differential gear oil filler bolt
and its gasket, and then check the oil lev-
el. It should be up to the brim of the filler
hole.
8-18