Pioneer BDR-X13E-S Owner's Manual page 19

Cautions in usage
• If power to the drive is turned off without selecting the [Save setting to the drive]
checkbox, the settings will revert to the previously saved settings.
®
• In a Windows environment, the setting can be changed at any time using the
Pioneer BD Drive Utility, when the drive is recognized.
• Custom Eco settings can only be changed in Windows. After changing the settings
in Windows, the device can be used with a Mac.
PureRead
Explanation of PureRead function
When using this device to read a music CD, you can use PureRead. This function
allows the device to work to acquire and reproduce the original sound as much as
possible such as by repeatedly reading scratched or soiled parts of the CD. PureRead
can be set to the following two modes or turned off.
Master Mode
(default setting)
Perfect Mode
OFF
What is interpolation?
Audio data that cannot
be read because of
scratches or other
damage is created by
inference from sounds
before and after it. This
sound will be degraded
compared to the original
sound.
This mode works to acquire and reproduce the original sound as
much as possible, but if it encounters audio data that cannot be
completely reproduced, it interpolates that data and continues
with acquisition.
This mode reproduces the original sound, and if it encounters
audio data that cannot be completely reproduced, it stops and
halts acquisition.
This mode carries out normal acquisition of music CD data. If
there is a scratch that prevents reading, interpolation will occur.
Sampling
Original
waveform
Original
waveform
Corrupted Acquired
waveform from audio
scratches, etc. waveform
Useful Functions
Audio is
interpolated
from sounds
before and
after.
19
BDR-X13E-S