Table of Contents
Advertisement
en Home Connect
facturer on the packaging. Set the
basic dosage amount that corres-
ponds to the dosage recommenda-
tion for 4.5 kg of normally soiled
laundry. In doing so, note the water
hardness.
Tip: You can also set the basic
dosage amount in the Home Connect
app.
Press and hold i-DOS 1 for approx.
1.
3 seconds.
a The display shows the set basic
dosage amount.
To adjust the setting, press
2.
Wait briefly to save the setting.
3.
Note: To set the basic dosage
amount for the other dispenser, re-
peat the steps with i-DOS 2.
Home Connect
17 Home Connect
This appliance is network-capable.
Home Connect
Connecting your appliance to a mo-
bile device lets you control its func-
tions via the Home Connect app, ad-
just its basic settings and monitor its
operating status.
The Home Connect services are not
available in every country. The avail-
ability of the Home Connect function
depends on the availability of
Home Connect services in your coun-
try. You can find information about
this at: www.home-connect.com.
The Home Connect app guides you
through the entire login process. Fol-
low the instructions in the Home Con-
nect app to configure the settings.
Tip: Please also follow the instruc-
tions in the Home Connect app.
Notes
¡ Please note the safety precautions
in this instruction manual and
make sure that they are also ob-
38
served when operating the appli-
ance via the Home Connect app.
→ "Safety", Page 4
¡ Operating the appliance on the ap-
pliance itself always takes priority.
During this time it is not possible
to operate the appliance using the
Home Connect app.
17.1 Setting up the
Install the Home Connect app on
1.
your mobile device.
Start the Home Connect app and
/
.
2.
set up access for Home Connect.
The Home Connect app guides
you through the entire login pro-
cess.
17.2 Setting up Home Con-
Requirements
¡ The Home Connect app has been
installed on your mobile device.
¡ The appliance is receiving signals
from the WLAN home network (Wi-
Fi) at its installation location.
Press and hold Remote Start for
1.
approx. 3 seconds.
Follow the instructions in the
2.
Home Connect app.
17.3 Home Connect menu
The Home Connect menu contains
all of the Home Connect settings.
Calling up the Home Connect
menu
Press and hold Remote Start for
▶
at least 3 seconds.
a The display shows the first setting
of the Home Connect menu.
Home Connect app
nect
Advertisement
Table of Contents
