Table of Contents
Advertisement
en Installation and connection
Connect the water inlet hose to a
1.
tap (26.4 mm = 3/4").
Open the water tap carefully and
2.
check that the connection points
are tight.
Water outlet connection types
This information is intended to help
you to connect this appliance to the
water outlet.
ATTENTION!
When draining, the water outlet hose
is subject to water pressure and may
come loose from the installed con-
nection point.
Secure the water outlet hose
▶
against unintentional loosening.
Note: Observe the draining heights.
The draining heights are: minimum:
60 cm, maximum: 100 cm
Siphon
Sink
16
Secure the con-
nection point with
a (24–40 mm)
hose clamp.
Fix and secure
the water outlet
hose with an el-
bow.
→ "Accessories",
Page 32
Plastic pipe with
rubber sleeve
Connecting the appliance to the
electricity supply
Note: Your electrical domestic install-
ation for this appliance must comply
with the local legal provisions and
safety regulations, and should in-
clude a residual current circuit-
breaker.
Insert the mains plug of the appli-
1.
ance's power cable in a socket
nearby.
The connection details of the appli-
ance can be found under Tech-
nical data → Page 63.
Check the mains plug is inserted
2.
properly.
4.6 Aligning the appliance
In order to reduce noise and vibra-
tion and to prevent the appliance
from moving, align the appliance cor-
rectly.
Use a WAF 17 wrench to loosen
1.
the lock nuts in a clockwise direc-
tion.
Fix and secure
the water outlet
hose with an el-
bow.
→ "Accessories",
Page 32
Advertisement
Table of Contents
