Page 1
Order/Customer Reference Number: Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell. Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with the date of purchase as well as photos of the merchandise defect, must be provided.
Page 2
INTRODUCTION Read the manual carefully to ensure you fully understand all use, care, assembly, and safety information. Assemble on a soft, flat, clean, and Read this manual carefully and dry surface. follow the assembly instructions in the order listed. Pay close Use a soft, protective barrier when attention to assembly drawings.
Page 3
COMPONENTS Inspect packaging to ensure all parts are accounted for before disposing of packing materials. Part Name Qty. Upper Base Panel Drawer Back Drawer Front Right Side Panel Left Side Panel Drawer Side Panel (L/R) Shelf Apron Back Panel Drawer Bottom Right Column Left Column Divider...
Page 4
IMPORTANT INSTALLATION INFORMATION For the stability of the unit, it is important that furniture connectors are installed correctly. See drawings and tips below for proper installation. Wood Dowel Cam Screw Cam Lock Install wood dowels by gently tapping Use a screwdriver to tighten the cam Align the cam lock opening (arrow) them into the designated hole using a screw until the shoulder is flush with...
Page 5
STEP 4 Tools Required STEP 5 Tools Required CR1: 1 IMPORTANT: CR2: 1 CR1: 1 Ensure the slide tracks are installed in the correct direction, as indicated in the drawings. CR2: 1 IMPORTANT: Ensure the slide tracks are installed in the correct direction, as indicated above.
Page 6
STEP 7 Tools Required Assistance is recommended for this step. 12: 2 13: 2 DZ: 20 IMPORTANT: Review the drawing carefully to ensure components are installed in the correct direction. We recommend laying components out before beginning this step. STEP 8 STEP 9 Tools Required Tools Required...
Page 7
STEP 10 Tools Required STEP 11 Tools Required IMPORTANT: R1: 2 Assemble the locking casters R2: 2 (R1) on the same side as the CT: 16 handle. Install the castors with the 2 holes facing the inside of the cart. STEP 12 STEP 13 Tools Required...
Page 8
STEP 14 SAFETY STATEMENTS & WARNINGS • For residential use only. Not for commercial or industrial use. • For indoor use only. • Ensure all fittings are tight before use. Periodically check fittings to ensure they remain tight. • Only use this unit on a flat, level surface. •...
Need help?
Do you have a question about the DTA-324 and is the answer not in the manual?
Questions and answers