Advertisement
Quick Links
BEADBOARD 6 - DRAWER DRESSER
Carefully review assembly and care instructions before using this product. Save this document for future reference.
Assemble components on a soft, clean surface to avoid scratching or damaging the finish.
HELPFUL HINTS
Sunnydaze Decor advises reviewing this manual fully, and assembling the unit soon after purchase.
Check that all parts are accounted for and familiarize yourself with the assembly before beginning.
DM-234
Purchase Date:
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell.
Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with
the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine
the cause of defects and for future quality control. Register your warranty at
If you have any questions, comments or concerns, feel free to contact us by phone at 833-982-1977, by email:
customerservice@sunnydazedecor.com, or via our contact us page at
DTA-317
SAVE THIS MANUAL FOR FUTURE REFERENCE.
/
/
Order/Customer Reference Number:
11/2022
https://tiny.cc/SunnydazeWarranty
https://tiny.cc/SunnydazeContact
2-PERSON
ASSEMBLY
RECOMMENDED
Page 1 / 10
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Sunnydaze Decor BEADBOARD DTA-317
Summary of Contents for Sunnydaze Decor BEADBOARD DTA-317
- Page 1 Order/Customer Reference Number: Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell. Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with the date of purchase as well as photos of the merchandise defect, must be provided.
- Page 2 INTRODUCTION Read the manual carefully to ensure you fully understand all use, care, assembly, and safety information. Assemble on a soft, flat, clean, and Read this manual carefully and dry surface. follow the assembly instructions in the order listed. Pay close Use a soft, protective barrier when attention to assembly drawings.
- Page 3 COMPONENTS Inspect packaging to ensure all parts are accounted for before disposing of packing materials. Part Name Qty. Right Side Panel Left Side Panel Top Panel Center Panel Crossbeam Back Panel Drawer Back Drawer Bottom Beadboard Drawer Front 10 Drawer Side Panel (L/R) 11 Drawer Front Hardware Qty.
-
Page 4: Important Installation Information
IMPORTANT INSTALLATION INFORMATION For the stability of the unit, it is important that furniture connectors are installed correctly. See drawings and tips below for proper installation. Wood Dowel Cam Screw Cam Lock Install wood dowels by gently tapping Use a screwdriver to tighten the cam Align the cam lock opening (arrow) them into the designated hole using a screw until the shoulder is flush with... - Page 5 STEP 2 Tools Required IMPORTANT: 04: 1 Ensure the slide tracks are installed in the correct direction, as indicated in the drawings. L1: 6 R1: 6 IMPORTANT: Install Flat Screw (C) after Set Screws (D). STEP 3 Tools Required IMPORTANT: This step uses the five Crossbeams (5) that have Long Dowel (O) installed into one end.
- Page 6 STEP 4 Tools Required IMPORTANT: Ensure the short end of Double Cam Bolt (P) is installed into the crossbeam, long end installs through Center Panel (4), as indicated in the diagram. STEP 5 Tools Required DM-234 11/2022 Page 6 / 10...
- Page 7 STEP 6 Tools Required STEP 7 Tools Required 06: 4 M: 2 DM-234 11/2022 Page 7 / 10...
- Page 8 STEP 8 Tools Required 07: 6 09: 2 10: 12 11: 4 STEP 9 Tools Required 08: 6 STEP 10 Tools Required IMPORTANT: Ensure the slide tracks are flush with the drawer front, and installed in the correct direction, as indicated in the left drawing. L2: 6 R2: 6 DM-234...
- Page 9 STEP 11 Tools Required DE: 1 HE: 1 Assistance required for moving the furniture. WARNING: Check for pipes and electrical wiring before drilling. When in doubt, consult a certified professional. IMPORTANT: Carefully measure the location of pilot hole before drilling and installing the wall anchor. Tipover Restraint Installation •...
- Page 10 STEP 12 Add clothing storage info or move 13 here so 12 can be bigger SAFETY STATEMENTS & WARNINGS • For residential use only. Not for commercial or industrial use. • For indoor use only. • Ensure all fittings are tight before use. Periodically check fittings to ensure they remain tight. •...
Need help?
Do you have a question about the BEADBOARD DTA-317 and is the answer not in the manual?
Questions and answers