Tuning The Guitar - Tuner Mode - Boss ME-33 Owner's Manual

Convenient Functions of the ME-33
Tunino the Guitar — Tuner Mode
mane
The
allows you
Mi. ailt-in chromatic auto-tuner, which
+ guitar easily, without any need to
change any of yous —mnections.
Moreover, the sound output is muted in Tuner mode,
making it unnecessary for you to turn down your amp
volume each time you tune.
2.
34
Press [TUNER] to switch to Tuner mode.
You can also switch to Tuner mode by pressing the BANK ¥
and BANK & pedals simultaneously.
Tune to the reference pitch.
you can change the reference pitch by turning the knob
that corresponds to "PITCH." The reference pitch can be
set in one-Hertz units in the range of 435-445 Hz.
If changing the reference pitch, always be sure to exit Tuner
mode before turning off the power. The new setting is stored
upon exiting Tuner mode. If you turn off the power with the
ME-33 still in Tuner mode, the changed reference pitch is not
saved.
3.
5.
Play a single note on the string to be tuned; play the
string open.
The name of the note closest to the string that is played
appears in the Bank display.
I~
t.
BANK
(NOTE)
#
Use your hand or other way to mute the other strings. You
may be unable to tune the string accurately if other strings are
vibrating during tuning.
First do a rough tuning so that the name of the note for
the string appears in the display.
Typically, the sixth and first strings are tuned to "E," the
fifth to "A," the fourth to "D," the third to "G," and the
seventh and second strings to "B."
The dot in the lower right of the Bank display changes to a
sharp sign (#).
Proceed to fine-tune the string.
When tuning according to the pitch shown in the LCD
screen's character display, finely adjust the tuning as
shown in the figure below.
A
\l
- - Y - Too High
a ee cal ee se
\l
- - nit - | Just Tuned
ke x Se : ey
V
- N or" - © Too Low