Malfunctions: Causes & Solutions; Waste & Recycling - ziva Savant Manual

ERRORS: CAUSES & SOLUTIONS
Problem
The device will not switch on
The display shows H20
The display shows E02
The device is relatively noisy
An error message will only disappear after the cause has been remedied or by
removing the plug from the socket for 5 seconds.
WASTE & RECYCLING
This marking indicates that this product may not be disposed of in household waste
throughout the EU. To prevent possible harm to the environment or human health from
uncontrolled waste disposal, please recycle the device in a responsible manner that
promotes sustainable reuse of materials. Return the used device via the return and
collection facilities or contact the retailer from whom you purchased the product. They
can take back the product and recycle it in an environmentally friendly way.
CONTACT & SUPPORT
For more information about Ziva funcooking products, please scan the QR code below.
Questions, comments or need help? Please contact us:
+31 (0)85 301 2306
info@ziva.cooking
Possible cause & solution
Check whether the power plug is plugged in. Check
whether the power cable or plug is damaged.
An alarm sounds and the machine switches off because the
water level has fallen below MIN. Disconnect the machine
from the power supply, top up water, reconnect and then
switch on again.
The heating element is too hot. An alarm sounds and the
machine switches off. Allow the machine to cool down, fill
up with water and switch on again. If this error appears
again, the temperature sensor is damaged and must be
repaired. Contact your retailer or manufacturer.
The machine may be calcified and needs to be descaled.
Scan the QR code for good descaler.
16