Table of Contents
Advertisement
8. BEFORE MAKING A SERVICE CALL
Symptom
Items to be checked
No image
■ Is the power supplied correctly?
■ Is the lens iris adjusted correctly?
■ Are the cables connected correctly?
• Is the shutter mode set correctly?
Poor color
• Is the monitor (TV) adjusted correctly?
• Is the white balance of the camera adjusted correctly?
• Is the illumination dark?
9. SPECIFICATIONS
Power supply
DC12V±10%
Power consumption
Approx. 3.6W
Pick-up system
RGB, 3CCD, Micro prism system
Image sensor
(Effective pixels)
1/3inch
IT—CCD
(Horizontal:768pixels, Vertical:494pixels)
Scanning system
2:1 interlace
Scan frequency
Horizontal: 15.734kHz, Vertical:59.94Hz
Sync system
1 ntemal/Extemal( Automatic switchi ng)
Horizontal resolution
570TV lines
Sensitivity
F8 standard(2000 lx, 3000K)
Minimum illumination
10 lx(F2.2, Sensitivity+ 18dB, 3000K)
SN ratio
64dB standard (G)
Lens mount
C mount(flange back: 17.526mm in-air)
Ambient temperature
32 to 104° F (0 to 40°C)
Ambient humidity
Less than 90%
Weight
Approx. 5.47oz (155g)
External dimension
1.73"(W) x 1.73"(H) x 3.07"(D)
(44(W) x 44(H) x 78(D)mm)
(except for protruded portion)
White balance
AWB(Automatic white balance), MANUAL(Manual)
Gain
MANUAL(Manual), OFF(OdB)
Output signal
RGB: 75Q unbalanced, D sub 15 pin connector
External sync input
HDorVD:
2—5V(p—p) Negative
Sync signal output
SYNC:
2.0V±1V(p—p)
75Q unbalanced
HD, VD, INDEX:
5V*°05 V(p-p), Negative,
Load impedance: More than 10kQ
External trigger input
TRIGGER:
Low level:Less than 0.4V, High level:3.4-5V
1 Pulse: Positive/Negative/Width selectable
2 Pulse: Positive/Negative/Width selectable
Interface
Serial data interface(RS-232C)
Optional parts
EXC—TF05B(RGB cable), etc
•Design and specifications are subject to change without notice.
30
Advertisement
Table of Contents
