Table of Contents
Advertisement
Tutorial
Fading the Scene In and Out.
1
Connect.up your epuipment as described in
this nrianual.
2,
Set up the Camcorder and VCR ready to
record a scene using the Preview
technique.
3.
Make sure that the Bypais switch on the
Vision 500 Is set to OFF.
4
MeKe sura that tha Vision 600 is set to ext.
SYNC.
5,
Maka sura that tha Vision 500 is in the
Display Mode
6
Set the Fade slider to the MIN position.
7,
Start the Camcorder and VCR to record the
scena. You can start and stop the titles at
any tima,
8.
As the Camcorder begins to play, move the
Fade slider to tha MAX position
9.
The picture end sound (and titles if
applicable) will ippoar on your TV,
10
As the Camcorder reaches the end of the
desired scene, move the Fade slider back to
the MIN position.
11,
The picture and sound (and titles if
applicable) will now have disappeared
leaving you to slop the recording VCR ready
for the next scene.
12, Repeat if necessary for the rest of the
production.
35
BYPASS
VIDEO
max
min
Advertisement
Table of Contents
