Table of Contents
Advertisement
TUTORIAL
Adding a Title Page to Your Production 1
You want to add an opening title page to the beginning of your production. You only want
to show one page on a coloured background for a duration of 30 seconds.
1
Confirm that all of the equipment is
connected correctly.
2.
Create the title using the EDIT MODE
as described in this manual.
(Use page 1 for this example).
3.
Place a blank tape into the recording
VCR and put the recording VCR into
RECORD PAUSE.
4.
Press the INT. SYNC key to place the
title on a coloured background.
INT
SYNC
5.
Press the DISPLAY MODE key to enter
the programming stage.
EDIT
DISPLAY
MODE
G
Press the DISPLAY SET key to set the
display sequence.
7.
Type the following :
The starting page number.
The ending page number.
The display cycle
The display mode.
The display speed.
DISPLAY
SET
1
1
1
1
3
26
Advertisement
Table of Contents
