Table of Contents
Advertisement
TUTORIAL
Adding a Title Page to Your Production 2
You want to add a title page to your production. You only want to show one page
superimposed onto one of the scenes for a duration of 30 seconds.
1.
Confirm that all of the equipment is
connected correctly.
2.
Create the title using the EDIT MODE
as described in this manual.
(Use page 1 for this example).
3.
Place the source tape into the playback
machine, a blank tape into the recording
VCR and put the recording VCR into
RECORD PAUSE.
4.
Press the EXT. SYNC key to
superimpose the title page.
5.
Press the DISPLAY MODE key to enter
the programming stage.
6.
Press the DISPLAY SET key to set the
display sequence.
7.
Type the following:
The starting page number.
The ending page number.
The display cycle
The display mode.
The display speed.
DISPLAY
SET
EDIT
DISPLAY
MODE
I NT
SYNC
28
Advertisement
Table of Contents
