Tutorial
Audio Mixing
The three channel mixer allows you to individually control the volume of tiie playback machine, an
external audio source and a microphone.
1.
Connect up your equipment as described
in this manual.
2.
Locate the beginning of the desired scene.
3. Play the scene so that you can visualize
the exact beginning and end points.
NOTE:
This is known as Previewing.
4,
VWiilst you are previewing a scene, adjust
the audio controls on the Vision 500 to
set the desired mix.
Use the preview technique as many times as necessary
to help you record the scenes first time.
5.
Use the Mic Fader to adjust the volume
of the microphone.
MIC
MUSIC
line
max
max
max
AUDIO MIXER
6.
Use the Line Fader to adjust the volume
of the playback machine.
7.
Use the Music Fader to adjust the
volume of the external audio.
8. Use the Master Fader to adjust the
overall volume of the whole mix.
MASTER
AUDIO
33