Do you have a question about the RV20 Mop and is the answer not in the manual?
Questions and answers
Julie Gilroy
May 24, 2025
i am having trouble with my vacuum. the brush does not spin
1 comments:
Mr. Anderson
May 25, 2025
The brush on the Tapo RV20 Mop vacuum may not be spinning due to large debris or objects entangled in the side brush or its mechanism. This can prevent normal operation.
This answer is automatically generated
Josh
February 18, 2025
My vacuum keeps stopping because it says it's in a restricted area
1 comments:
Mr. Anderson
February 18, 2025
The Tapo RV20 Mop may keep stopping due to a restricted area because of virtual walls or no-go zones set in the Tapo app. These settings prevent the robot from entering specific areas, which could cause it to stop if it detects a restricted zone in its cleaning path.
Page 1
MagSlim LiDAR Navigation Robot Vacuum & Mop 78-mm Ultra-Slim Design for All-Round Cleaning 2700Pa Powerful Suction Vacuum and Mop Combo Precision Mapping and Customizable Cleaning App Control Tapo RV20 Mop...
Page 2
• Press and hold simultaneously for 10 seconds: Restore to factory default settings. • Red: Battery level < 20%; Error • Orange: Battery level between 20% and 80% • Green: Battery level > 80% MagSlim LiDAR Navigation Robot Vacuum & Mop Tapo RV20 Mop...
Page 3
Dustbin & Water Tank Dustbin Water Tank Cliff Sensors Open Dustbin Caster Wheel Side Brush Side Brush Charging Contacts LED Indicator Main Brush Wheel Charging Contacts Main Brush Cover Latch Charging Dock MagSlim LiDAR Navigation Robot Vacuum & Mop Tapo RV20 Mop...
Page 4
Set up areas you don't want the robot to go via millimeter-level detection precision, avoiding when encountering carpets. floor types with consistent and steady water the Tapo app. omissions and repeated cleaning. pressure. MagSlim LiDAR Navigation Robot Vacuum & Mop Tapo RV20 Mop...
Page 5
Main Wheels Once a month Sensors Once a month Charging Contacts Once a month *Replacement frequency may vary depending on the actual situation. Parts should be replaced if visible wear appears. MagSlim LiDAR Navigation Robot Vacuum & Mop Tapo RV20 Mop...
Page 7
Based on internal testing carried out by the manufacturer, using quiet vacuuming mode. Actual results may vary according to the working status. ‡ Based on internal testing carried out by the manufacturer, using low water flow with a full battery. Actual results may vary according to the home environment. It is recommended to mop with Tapo Robot Vacuum Foamless §...
Need help?
Do you have a question about the RV20 Mop and is the answer not in the manual?
Questions and answers
i am having trouble with my vacuum. the brush does not spin
The brush on the Tapo RV20 Mop vacuum may not be spinning due to large debris or objects entangled in the side brush or its mechanism. This can prevent normal operation.
This answer is automatically generated
My vacuum keeps stopping because it says it's in a restricted area
The Tapo RV20 Mop may keep stopping due to a restricted area because of virtual walls or no-go zones set in the Tapo app. These settings prevent the robot from entering specific areas, which could cause it to stop if it detects a restricted zone in its cleaning path.
This answer is automatically generated