Removing The Battery - HP PageWriter 100 User Manual

r
battery as soon as possible for at least 16 hours. To
charge the battery, plug the cardiograph into the wall
outlet with the k-1 switch set to Standby (off).
I
MlTIo.02
Figure A-2. Removing the Battery Door.
A. Battery Door
Removing the Battery To Remove the Battery:
1. Unplug the cardiograph from AC power.
2. Turn the cardiograph bottom-side up.
3. Slide the battery door in the direction of the arrow
until it unlatches (approximately l/2 inch), as shown
in Figure A-2. Lift off the door.
4. Unplug the battery connector from the cardiograph
by squeezing the edges of the connector and pulling it
straight out from the cardiograph.
5. Remove the battery and cable.
6. If the battery has been removed for storage, replace
the battery cover by placing the battery door into its
Setting up Your Cardiograph for the First Time A-5