HP PageWriter 100 User Manual page 65

Note
1
!b
The nominal 115 VAC voltage setting works equally well
for any voltage between loo-120 VAC. The nominal
230 VAC voltage setting works equally well for any
voltage between 220-240 VAC.
[. C-j@) Qj-JLW j
a
;
,:.:
I4 Ei c
Figure A-l. Rear View of Cardiograph
A. Equipotential Connector
B. AC Power Receptacle
C. Voltage Select Switch
Note I
w
The equipotential connector is only used when the
cardiograph must be plugged into an ungrounded
outlet. See "Patient and Operational Safety Notes" in
Chapter 1, Getting Acquainted for more information
about using the equipotential connector.
Setting up Your Cardiograph for the First Time A-3